series am3t-nz 3 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.c 1 of 3 north america only custom product s p ecial conditions ma y app l y features: models single output model input voltage (v) output voltage (v) output current max (ma) isolation (vdc) efficiency (%) am3t-1203s-nz 9-18 3.3 909 1500 71 am3t-1205s-nz 9-18 5 600 1500 76 am3t-1212s-nz 9-18 12 250 1500 79 am3t-1215s-nz 9-18 15 200 1500 80 am3t-2403s-nz 18-36 3.3 909 1500 76 am3t-2405s-nz 18-36 5 600 1500 78 am3t-2412s-nz 18-36 12 250 1500 81 am3t-2415s-nz 18-36 15 200 1500 82 am3t-4805s-nz 36-72 5 600 1500 78 am3t-4812s-nz 36-72 12 250 1500 80 am3t-4815s-nz 36-72 15 200 1500 81 models dual output model input voltage (v) output voltage (v) output current max (ma) isolation (vdc) efficiency (%) am3t-1205d-nz 9-18 5 300 1500 76 am3t-1212d-nz 9-18 12 125 1500 79 am3t-1215d-nz 9-18 15 100 1500 80 am3t-2405d-nz 18-36 5 300 1500 78 am3t-2412d-nz 18-36 12 125 1500 80 am3t-2415d-nz 18-36 15 100 1500 81 am3t-4805d-nz 36-72 5 300 1500 78 am3t-4812d-nz 36-72 12 125 1500 80 am3t-4815d-nz 36-72 15 100 1500 81 note: all specifications are m easured at an ambient temperatur e of 25c, humidity<75%, nominal input voltage and at rated outpu t load unless otherwise specified. input specifications parameters nominal typical maximum units voltage range 12 9-18 vdc 24 18-36 48 36-72 filter ? isolation specifications parameters conditions typical maximum units tested i/o voltage 60 sec 1500 vdc resistance > 1000 mohm capacitance 100 pf ? rohs compliant ? ? 24 pin dip package ? ? shielded metal package ? ? high efficiency up to 83% ? ? wide 2:1 input range
series am3t-nz 3 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.c 2 of 3 north america only custom product s p ecial conditions ma y app l y output specifications parameters conditions typical maximum units voltage accuracy 1 % voltage balance 3p and 5 n. % short circuit protection continuous short circuit restart auto-recovery line voltage regulation (single) 0.2 % line voltage regulation (dual) 0.5 % load voltage regulation (single) 0.5 % load voltage regulation (dual) 1 % temperature coefficient 0.03 %/ o c ripple & noise 20mhz bandwidth 80 mv p-p general specifications parameters conditions typical maximum units switching frequency 100% load 300 khz operating temperature with derating above +71c -40 to +85 o c storage temperature -55 to +125 o c max case temperature 100 o c cooling free air convection humidity 95 % case material metal weight 15 g dimensions (l x w x h) 1.25 x 0.80 x 0.40 inches 31. 80 x 20.30 x 10.20 mm mtbf >1 000 000 hrs (mil-hdbk -217f, ground benign, t=+25 o c) pin out specifications dimensions n.c.: not connected pin 1500vdc single dual 1 no pin no pin 2 -v input -v input 3 -v input -v input 9 no pin common 10 no pin no pin 11 n.c. -v output 12/13 no pin no pin 14 +v output +v output 15 no pin no pin 16 -v output common 22 v+ input +v input 23 v+ input +v input 24 no pin no pin 23.03 (0.91) 20.30 (0.80) 2.54 (0.10) 5.08 (0.20) printed face built-in stand-offs to ease pcb cleaning 10.20 (0.40) 4.10 (0.16) 0.50 (0.02) 15.24 (0.60) 31.80 (1.25) bottom view 23 9 11 14 16 22 23
series am3t-nz 3 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.c 3 of 3 north america only custom product s p ecial conditions ma y app l y filtering single output filtering dual output derating -40 -20 0 2040 6080 100 100 80 60 40 20 0 free air convection 71 o c safe operating area output power (%) 85 ambient temperature o c external capacitors note: 1. datasheets are updated as needed and as such, specifications ar e subject to change without notic e. once printed or downloaded , datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety agency cert ifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an am bient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary an d may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control sys tems or other such applications which necessitate specific safety and regulatory standards ot her the ones listed in this datasheet. 7. warranty is in accordance with aimtec?s st andard terms of sale available at www.aimtec.com. vin (vdc) cin) (uf) vout (vdc) cout (uf) 12 100 3.3 2200 5 1000 12 470 15 330 24 & 48 10-47 5 680 12 330 15 220
|
